Using Ethernet Bridge 2.0 for Windows 2000 Thursday, April 23, 2009 at 6:36 pm Windows 2000 Annoyances Discussion Forum Posted by geek9pm (274 messages posted) Using Ethernet Bridge 2.0 for Windows 2000 This is a small utility (driver and GUI configuration tool) for MAC level bridging TCPIP bound network interfaces (based on NDIS-hooking technology for Windows 2000/XP/2003). It can be used, an example, with OpenVPN in its bridging mode, especially with the server-end running on a Windows 2000 http://www.ntkernel.com/w&p.php?id=20 Read the article over. This is a quick easy way to overcome the problem with the IP address Windows 2000 always wants to use for ICS. I believe this is the utility I found. You can to start every time you boot you windows 2000 computer. It is a ZIP file. so you will need a free unzip program. Lots of those around.Google unzip. Geek9pm Written in response to: re:No ICS, Router 192.168.0.1 conflict (geek9pm: Thursday, April 23, 2009 at 6:11 pm) Responses to this message: re: Using Ethernet Bridge 2.0 for Windows 2000 (Funky Monk: Saturday, April 25, 2009 at 9:27 am) All messages in this thread [show all] ICS not going through because LAN isn't connected? (Funky Monk: Wed, Apr 22, 2009, 1:54 pm) re:No ICS, Router 192.168.0.1 conflict (geek9pm: Thu, Apr 23, 2009, 6:11 pm) Using Ethernet Bridge 2.0 for Windows 2000 (geek9pm: Thu, Apr 23, 2009, 6:36 pm) re: Using Ethernet Bridge 2.0 for Windows 2000 (Funky Monk: Sat, Apr 25, 2009, 9:27 am) re: Using Ethernet Bridge 2.0 for Windows 2000 (geek9pm: Sat, Apr 25, 2009, 9:40 am) Reply or follow-up to this message Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows 2000 Discussion Forum