So, let me verify, you have a T1 line, it is split off into multiple connections 
that connect to the server and other workstations.. 

Like so:
    (T1) --(router/switch)--
                                       |--Server
                                       |--Workstation 1
                                       |--Workstation 2
                                       |--...and so on

If it is setup like this then ftp://publicip should work... The PC will attempt to 
connect to the public ip address and be routed back to the server..  

I'm at a loss as to why this wouldn't be working if it is working over the internet.. 
Is your setup different then what I listed above?  Does the server sit on a public 
IP (T1s usually give 4 or 5 IP addresses to use)?  This is most likely an issue that 
is quite obvious if I knew exactly how things were wired there.

• Reply or follow-up to this message

• Search this forum
• Start a new thread on a different subject

• Report abuse of the forum