Annoyances.org
Home » Windows 98 Discussion Forum » Message 1243284662 Search | Help | Home
  
Tip: Run a free scan for common Windows errors ad

re: Zone [Alarm] won't (always) load on [Startup]
Monday, May 25, 2009 at 1:51 pm
Windows 98 Annoyances Discussion Forum
Posted by Marjorie (14 messages posted)


Thanks, gewg.
I'll uninstall Zone and do 
Steps 1,2, and 3.  I'll be back....






On Sunday, May 24, 2009 at 9:38 pm, gewg_ wrote:
>Marjorie_6173 wrote:
>|I run ZoneAlarm version:6.1.737.000 and Avast.
>|Everytime I do any PC maintenance, like ccCleaner or defrag,
>|Zone won't load on boot until after maybe 5 reboots, when it is magically fine.
>|
>The intermittent nature of this bothers me. More below.
>
>|Meantime, it gives me:
>|"ZLCLIENT caused an invalid page fault in module FRAMEWRK.DLL[...]
>|
>Typically, the list of things to do with an error message like that goes this way:
>
>1) Do a Registry restore.
>http://www.annoyances.org/exec/forum/win98/1109567064
>(The problem in that thread is different, but the steps are the same.)
>
>Another version--including *a caveat*.
>(The sooner you act on problems that you notice, the easier they are to fix.)
>cache
>of
www.annoyances.org/exec/forum/win98/1047869242

>
>2) Reinstall the application program.
>
>
>This is a reference to a list of things it *could* be:
>cache
>of
www.annoyances.org/exec/show/article07-002

>
>3) Do a SCANDISK on your hard drive using the Thorough option.
>That option is a "surface test"
>and is a check that addresses the intermittent nature of this problem. In effect,
>it checks to see how the magnetic oxide layer on the disk's platter is ageing.
>
>This test should be #4 on the list, but it's easier to do than a RAM test.
>(You already have the tool for a surface test.)
>IMO, the next item down would be more likely to turn up the real culprit
>--if this is, in fact, hardware-related.
>
>4) Test your RAM overnight.
>This is best done using a specially-made bootable floppy:
>http://www.memtest86.com/download.html
>You want the one for the floppy for Windows.
>
>Here's the directions for making the bootable floppy from the file you download:
>cache
>of
www.digital-handyman.com/ftp/Memtest86%2520-%2520Memory%2520Diagnostic%2520Page.txt



Written in response to:
re: Zone [Alarm] won't (always) load on [Startup] (gewg_: Sunday, May 24, 2009 at 9:38 pm)

There are presently no replies to this message.

All messages in this thread [show all]
-Zone won't load on boot (Marjorie: Sun, May 24, 2009, 7:10 pm)
-re: Zone [Alarm] won't (always) load on [Startup] (gewg_: Sun, May 24, 2009, 9:38 pm)
*re: Zone [Alarm] won't (always) load on [Startup] (Marjorie: Mon, May 25, 2009, 1:51 pm)
-re: Zone won't load on boot (Keith Stanier: Tue, May 26, 2009, 4:08 am)
-re: Zone won't load on boot (Marjorie: Tue, May 26, 2009, 11:18 pm)
*re: Zone won't load on boot (Keith Stanier: Wed, May 27, 2009, 4:15 am)
-re: Zone won't load on boot (gewg_: Wed, May 27, 2009, 10:15 am)
-re: Zone won't load on boot (Marjorie: Fri, May 29, 2009, 7:14 pm)
-re: Zone won't load on boot (Keith Stanier: Sat, May 30, 2009, 1:46 am)
-re: Zone won't load on boot (Marjorie: Sat, May 30, 2009, 6:47 pm)
*re: Zone won't load on boot (Keith Stanier: Sun, May 31, 2009, 8:15 am)
*I have a Win98SE CD, but... (gewg_: Sun, May 31, 2009, 10:13 am)
Return to the Windows 98 Discussion Forum


All content at Annoyances.org is Copyright © 1995-2009 Creative Elementtm All rights reserved.
Please do not plagiarize; redistributing these pages without permission is strictly prohibited.